For developers and the more curious, its reference firmware and hardware schematic are open-source for customized applications and alternate command, control, and video output channels such as analog. Using focal plane arrays of either 160x120 or 80圆0 active pixels, Lepton easily integrates into native mobile-devices and other electronics as an IR sensor or thermal imager. The radiometric Lepton captures accurate.

PureThermal 1 can do 9 Hz color video over usb using the USB UVC class.The FLIR Lepton camera core is required for operation but not included in the base unit price since many of our users already have Leptons. The calibration coefficients are stored in non-volatile memory of the sensor itself. Execute on-board image processing without the need for an external system. So when you get one of these it is plug and play. 1x FLIR Lepton® 2.Out of the box, the VOSPI stream of the Lepton 2.5 outputs temperature data in Kelvin according to that calibration and compensated by the FPA temperature.FLIR's Lepton SDKs ( Behind EULA Wall ).Dual Low Noise LDO for 2.8V voltage (can be by-passed).Power Efficient 1.2V core voltage (can be by-passed).25-MHz reference clock (can be by-passed).Low operating power, nominally 150 mW (

Output Format: User-selectable 14-bit, 8-bit (AGC applied), or 24-bit RGB (AGC and colorization applied).

Radiometric accuracy (35☌ Blackbody) Greater of:.

When inserting it into the breakout board be sure to use proper personal grounding, such as a grounding wrist strap, to prevent damage the module. The Radiometric Lepton module is extremely sensitive to electrostatic discharge (ESD). Note: This kit comes in two separate parts and will need to be assembled once received. A few things to consider about this kit: the breakout board will accept a 3-5.5V input and regulate it to what the Lepton® wants, to read an image from the lepton module all you need is an SPI port, and to configure the camera settings you also need an I 2C port, although this is not required. Meanwhile, each breakout board in these kits provides the socket for the Lepton, on-board power supplies, 25Mhz reference clock (can be by-passed), power efficient 1.2v core voltage (can be by-passed), dual low noise LDO for 2.8V voltage (can be by-passed), 100 mil header for use in a breadboard or wiring to any host system. The Lepton 2.5 can output a factory-calibrated temperature value for all 4800 pixels in a frame irrespective of the camera temperature with an accuracy of +/-5˚C. The Radiometric Lepton® LWIR module included in each Dev Kit acts as a sort of camera and packs a resolution of 80 × 60 active pixels into a camera body that is smaller than a dime and captures infrared radiation input in its nominal response wavelength band (from 8 to 14 microns) and outputs a uniform thermal image.

Lepton 2.5 raspberry pi